EN 54 standard for fire detection and alarm equipment and systems
In buildings, commercial, office, and industrial facilities, fire safety measures are essential to reduce possible risks in case of fire. Using standard and reliable equipment is one of the ways to mitigate these risks. For this reason, in this article from Ganjineh Pavan’s blog, we will review the EN 54 standard for fire detection and […]
NFPA 72 standard for the design and installation of fire alarm and signaling systems
NFPA is the standard of the American National Fire Association, which has various topics and codes. We have previously discussed NFPA 13 and NFPA 2001 in Ganjineh Pavan‘s articles. In this article, from Ganjineh Pavan’s articles, we discuss the NFPA 72 standard, guidelines for the design and installation of fire alarm and signaling systems. History […]
What is LPCB Certification or Loss Prevention Certification Board?
Third-party certification is a conformity assessment process that is carried out by an entity independent of the supplier and customer organizations. This type of certification confirms that products and services have met the requirements of relevant standards and other normative documents, and their conformity is periodically evaluated. LPCB certification is one of the international certification […]
Clean agent fire suppression system and NFPA 2001 standard
Sprinkler systems are often the most common solution to protect people and property from fire hazards. Although water-based sprinklers have many advantages, their environmental degradation rate is also high. For this reason, sometimes when there is a need to quickly suppress a fire and protect sensitive items of high value, a Clean Agent fire suppression […]
FM200 fire suppression system advantages and applications
Different fire suppression systems may contain water, powder, gas, or foam based on the contents used. The FM200 fire suppression system is one of the gas-based firefighting systems that have particular advantages over many fire suppression agents. For this reason, in this article from Ganjineh Pavan‘s blog, we will examine the FM200 fire fighting system, […]
SIL certification and its importance
ndustrial safety is important because it protects our lives, environment, and assets. Hence, to reduce risks in hazardous industrial applications such as gas and fire detection system equipment (F&G System), it is very important to obtain safety standards such as ATEX certification. SIL certification is another industrial safety standard that is very important in the […]
Key points related to fire fighting and elevators
In the domain of fire safety, the synergy between firefighting techniques and the incorporation of elevators as a pivotal component in emergency response tactics within structures holds paramount significance. Acquaintance with salient points concerning firefighting and elevator systems is imperative to facilitate the prompt and secure evacuation of occupants in the event of a fire. […]
Flash point and its importance in industries
One of the biggest causes of loss of life and property damage in industries is fire. The high volume and frequency of use of flammable liquids and gases used all over the world shows that the risk of industrial accidents due to the ignition of these materials is very high. For this reason, it is […]
Four new fire extinguishing technologies
The basic principles of fire protection and safety, such as choosing the right type of extinguisher and fire emergency exit, usually remain the same over time. But technological advances help make fighting fires much easier and more effective. In the last few years, there have been many advancements in the firefighting and fire protection industry. […]
